Ce Declaration Of Conformity - USAG 942 PE1 Manual Original

PLACING THE MACHINE IN SERVICE
LUBRICATION
Always use of an air line lubricator with these tool. We
recommended the following Filter-Lubricator-Regulator
Unit: USAG N.582.
Every eight hours' operation, if a lubricator is not used on
the compressed air network, inject 1/2 to 1cm
machine's inlet connection.
Model
942 PE1
Model Free speed
rpm
942 PE1 5000
* k = measurement uncertainty in dB
WE, STANLEy BLACk & DECkER ITALIA S.R.L. - VIA VOLTA, 3 - 21032 MONVALLE (VA) ITALy, DECLARE UNDER OUR
OWN RESPONSIBILITy THAT THE PRODUCTS 942 PE1 – USAG 1" AIR IMPACT WRENCH
- IS IN CONFORMITy WITH THE «MACHINERy» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITy WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD
EN ISO 11148-6: 2012
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-2:2009
Optional tool support hangersfor use
with balancers. Not for hoisting tool or
securing.
Square Impact Max.
drive rate Torque
'' bpm N.m
1" 900 3390
Air
consumption
l/min
340
** k = measurement uncertainty in m/s²

CE DECLARATION OF CONFORMITY

through the
3
Pressure
dB(A)
k*
100,9 3
Working Weight
pressure
bar kg
6,2 6,89
EMERGENCY
GATE VALVE
Noise level
Power Pressure
dB(A) dB(C)
k*
111,9 3 125
Dimensions
mm
243,8 x 96,5 x 249
23.01.2015
QUALITy MANAGER
Vibrations
level
m/s
2
k* k**
3 10,6 1,55