Mitsubishi DIAMOND PLUS 73 Manual Del Usuario página 12

Controls
OSD(On-screen Display) control buttons on the
front of the monitor function as follows:
SELECT Enters and exits the OSD menu.
-/+ Selects one of the controls and decreases or increases the
RESET Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately 1 sec.
Brightness: Adjusts the overall image and background
screen brightness.
Contrast: Adjusts the image brightness in relation to the
background.(Contrast control is also effective with "-,+"
button even though OSD window is not visible.)
R
Red Color Control: Adjust the red contrast of the display.
G
Green Color Control: Adjust the green contrast of the
display.
B
Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal size
of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.
adjustment.
E-4