Cleaning And Maintenance - Domo DO722BL Manual De Instrucciones

USE
1. Make sure that the speed regulation button is at "0ff".
2. Put the plug in the outlet. Place the glass jug on the motor unit. Turn the speed control to 'on'. The
blue 3 function buttons light will flicker.
3. Fill the container with the desired ingredients. Make sure that you do not exceed the maximum
amount of 1.75 l.
4. Place the lid with measuring beaker on the pitcher and turn the speed control to the desired speed
or the pulse position for quick and delicate mixing.
5. Or use the function buttons. Set the speed control to the on position and press one of the function
buttons:
· Smoothie: this function is perfect for making smoothies. The blender works for 1 minute with the
speed varying.
· Auto clean: see section 'Cleaning and maintenance'.
· Ice crush: this function is designed to crush ice cubes. The blender will alternate between on and
off for 30 seconds.
6. If you want to add ingredients while you are blending, remove the measuring cup from the lid and
put the extra ingredients into the jar through this fill opening.
7. Turn off the blender by setting the speed knob to 0ff.
8. Unplug the blender after use. Then remove the pitcher from the motor part by turning it
anticlockwise.
Caution:
· For each use, the consecutive operation time should not exceed 3 minutes. Between two continuous
cycles at least 10 minutes resting time should be maintained. The appliance needs to cool down to
room temperature before starting the next blending cycle.
· Never use boiling liquids (maximum 60 °C) or do not use the blender when the jar is empty.
· You cannot select any of the function buttons when using the speed control. First switch the control to
the on position.
· If the pitcher is not mounted correctly, the appliance will not work.
· Always fill with enough liquid to achieve a perfect mixture. We also recommend you add some water
to the pitcher when mixing ice cubes with the 'ice crush' feature.

CLEANING AND MAINTENANCE

AUTO CLEAN
Always clean the blender immediately after us for easy cleaning. Do not let food dry in the jar or the blade
assembly, this will make them harder to clean.
1. Pour some warm soapy water into the pitcher. Turn the speed control to 'on'. Press the 'Auto clean'
button. When the 'auto clean' programme is finished, the appliance will automatically turn off. Turn
the speed control to 'off'. Then empty the pitcher and rinse it with clean water.
2. Unplug the blender before continuing with cleaning.
3. Wipe the motor unit clean with a damp cloth and dry thoroughly.
www.domo-elektro.be
21
DO722BL