Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
15. TECHNICAL CHARACTERISTICS OF THE POOLWATCH BASIC pH /Cl INORGANIC EQUIPMENT
-
Measure range pH: 0 to 14 (resolution: 0.1 unit)
pH Set Point range: 0 to 14
-
-
Cl Measure range: 0 to 10 (resolution: 0.01 unit)
-
Cl Set Point range: 0 to 10 ppm
Delay: 10 seconds
-
-
Calibration to pH 7 and pH 4
-
Power consumption of equipment: 5W
-
Feed tension: 230 V monophasic + earth, 50 Hz
Commutation hysteresis for time: +/- 10 seconds
-
TECHNICAL SPECIFICATIONS POOLWATCH BASIC
Controller and/or Inorganic Chlorine regulator.
-
-
Visualisation through LCD display backlightened alphanumeric (16 characters)
-
24 bits dynamotor ADC with balanced lining up of temperature digital filtering reading to have a high immunity to jamming.
-
16 bits microprocessor.
2 regulation outputs ON/OFF (relay) (free power connectors)
-
-
Temperature output
-
Output 4-20 mA
Communication output.
-
-
Multilanguage programme.
-
Warning of faulty electrode in calibration.
-
Readings of slope and asymmetries of the probes.
-
Reading of direct current of the sensor of chlorine.
It is advisable to make a review of the equipment PoolWatch Basic once a year by a specialised technician.
15
Ref: PW Basic-16647-16648-v2-gb-T01
Publicidad
Capítulos
Tabla de contenido
