EL -5803 Instrucciones De Instalación página 10

EN
SMOKE AND HEAT DETECTOR MAINTENANCE
To keep your detector in good working condition, you must test the detector weekly,
according to the "Testing Your Smoke and Heat Detector" section.
CLEANING THE SMOKE AND HEAT DETECTOR
Clean the detector housing with a dry or damp cloth to remove dust and dirt. If
necessary, open the smoke chamber and clean the interior of the detector.
clean
To the detector:
1. Remove the detector from the detector base.
2. Remove the batteries.
3. Use a fine paintbrush to remove dirt from the chamber.
4. After cleaning, close the smoke chamber, secure the housing and re-mount the detector
on the ceiling.
DO NOT FORGET TO REPLACE THE BATTERIES!
10 1 & 2-Way Smoke & Heat Detector