Troubleshooting Guide - Brod & Taylor FP-105 Manual De Instrucciones

Altering Food Temperature in
Proofer Modes
• Humidity (using the water tray) will raise the temperature of items in the
proofer.
• Raising the height of the rack will decrease the temperature of items on the
rack. (The Brod & Taylor accessory Shelf Kit includes a rack with folding legs.)
• Covering containers will increase the temperature inside the container.

Troubleshooting Guide

E1 error in display
Folding walls came apart
Contents of Proofer too warm
Contents of Proofer too cool
Proofer turns off
Proofer lid will not close for
storage
Proofer base is too cold. Allow to warm to
room temperature. Proofer must be completely
UNPLUGGED from power to reset.
See our instruction video:
www.brodandtaylor.com/support
Temperature may be reduced by:
• Remove water tray. (Dry Mode)
• Elevate rack. (use Shelf Kit with elevating legs).
• Use uncovered containers to reduce trapped heat.
Temperature may be increased by:
• Use water tray. (Humid Mode)
• Make sure rack is in lowest position.
• Use covered containers to hold heat.
Ensure power cord is fully seated into socket.
Folding sides should be closed flat with hinge
secured. Open cross guides must face up. Ensure
wire rack is upside down and seated in open cross
guides.
Page 11