Low Pressure; High Pressure - Briggs & Stratton 020228 Manual Del Propietário

How to Use ProjectPro™ Nozzle
System
The quick–connect on the nozzle extension allows you to
switch between four different ProjectPro™ system nozzles.
The ProjectPro™ nozzles vary the pressure and spray
pattern as shown (Figure 12).
Figure 12 — Nozzle Spray Patterns

Low Pressure

High Pressure

Delicate
40° Yellow 15° Orange
1650 PSI 1950 PSI
2.2 GPM 2.1 GPM
Follow these instructions to change ProjectPro™
nozzles:
1. Engage trigger lock on spray gun.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER exchange ProjectPro™ nozzles without locking the
trigger lock on the trigger.
• DO NOT twist ProjectPro™ nozzles while spraying.
Black
Use to apply
detergent
Max
General
0° Red
2200 PSI
1.9 GPM
Section 4: Operation
2. Pull back collar on quick–connect and pull current
ProjectPro™ nozzles off. Store ProjectPro™ nozzles in
holder provided on the accessory tray.
3. Select desired ProjectPro™ nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats, RV's,
patio furniture, lawn equipment, etc., select yellow
Delicate ProjectPro™ nozzle (Figure 13).
Figure 13 — Delicate Nozzle
• For general rinsing (medium pressure and medium
flow), ideal for most all purpose cleaning such as
home siding, brick patios, wood decks, driveways
and sidewalks, garage floors, etc., select orange
General ProjectPro™ nozzle (Figure 14).
Figure 14 — General Nozzle
11