auna Wallie 10033227 Manual De Instrucciones página 46

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
46
Wake to CD, USB, Radio or Beeping Alarm
When the alarm time is reached, the CD, radio or beeping alarm will
sound for the time you set then shut off and reset itself for the following
day – without you having to press the SNOOZE button (11).
You may activate the snooze function manually after the alarm sounds
by pressing the SNOOZE button (11). The buzzer will stop for the snooze
time (9 minutes) then will come on again. The snooze operation can be
repeated again within the remaining minutes from the set alarm time.
NOTE: Remaining time must be greater than 9 minutes from the alarm off
time, otherwise the alarm will stop until the next day.
To stop the alarm immediately after it sounds, tap the
button (2) on the main unit or (1) on the remote control. It will reset itself
for the following day.
To cancel the following day's alarm, tap the AL SET button once. The
ALARM icon
goes off.
Snooze function
Press the SNOOZE button (11) on the main unit once to terminate the alarm
mode temporarily, and the alarm will restart again after 9 minutes on each
press.
Sleep operation
This function allows you to program the system to switch itself off after a
set period of time. You can set your sleep time in power on mode:
1.
To activate the sleep function, press the SLEEP button (11) on the main
unit. The display will show "Sleep Timer-OFF,120,90,60,30,20,10,5" and
flash.
2. When the display shows your desired sleep time, release the button.
The sleep timer is now activated. The display will show "10" indicating
"10 minutes" sleep time and so on. When the sleep time has counted
down to zero, the unit will go off.
3. To cancel sleep, press the SLEEP button (11) on the main unit once again.
The sleep function will turn off.
 STANDBY

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wallie 10033228

Tabla de contenido