Tripp-Lite U209-000-R Manual Del Usuario página 6

Installing the USB to Serial Adapter's Driver*:
* May vary slightly depending upon installed O/S version.
1. Open Device Manager (Start-Settings-Control Panels-System;
Device Manager Tab).
2. Select the USB-Serial Adapter. It will appear as Unknown Device,
Composite Device or USB Device. It will appear under "Other
Devices" or "Universal Serial Bus Controller".
3. Click "Properties".
4. Click on "Reinstall Drivers".
5. In Add New Hardware Wizard click "Next".
6. It will now conduct a search, choose "Next".
7. Select "Specify Location". Next click "Browse" or select the driver
location. Select either the drivers on the CD (Example: D:\U209-000-R)
or the one downloaded. Note, if you are using Windows ME you
need to use the WIN98 driver. Click "Next".
8. If detected, click "Next". (If not go back and try again).
9. When done click "Finish".
10. Connect your Serial Device to the USB-Serial Adapter.