For your safety
1.
For your safety
The light has been designed in accordance
with state-of-the-art standards, manufac-
tured with utmost care using high-quality
materials, and tested.
Nevertheless, its use may constitute a risk
to persons or cause material damage.
X Read all enclosed instructions and infor-
mation.
X Please observe the warnings included
in the documentation and attached to
the unit.
X The device must only be used in tech-
nically perfect condition, and only by
persons being aware of the risks and
dangers involved in operating the
device.
X Keep this document available near the
device.
1.1
Designated use
The light with integrated magnifier is
intended for the illumination and simulta-
neous 0magnification of objects.
The luminaire model RLLQ 48/2 AR has
been especially designed for use in elec-
trostatically protected areas (EPA).
1.2
Safety instructions
Explosion hazard
Operating the light in rooms subject to
explosion hazards can trigger an explosion
and result in serious injuries or death.
X Do not operate the light in rooms sub-
ject to explosion hazards.
Danger due to electric current
Improper use and faulty work on the light
may result in injuries and material damage.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and make
sure that they are identical.
X Lay the connecting cable in such a way
that it cannot be damaged.
X Disconnect a damaged connecting
cable immediately from the power sup-
ply and have it replaced by the manufac-
turer, by a service technician authorised
by the manufacturer or by a person with
comparable qualification.
X Have the maintenance and repair per-
formed by the manufacturer, by a
service technician authorised by the
manufacturer or by a person with com-
parable qualification.
X Before performing work on the light,
disconnect the light from the power
supply.
Risk of fire
When exposed to sunlight, the magni-
fier can act as a focusing glass and ignite
other objects.
X When the magnifier is not used, cover
it with the magnifier cover.
Mount the light in a stable position
A toppling light can result in personal inju-
ries and material damage.
X Mount the light in a stable position.
Hazard caused by unsuitable spare parts
Unsuitable spare parts can result in injuries
and material damage.
X Only spare parts released by the man-
ufacturer may be used as spare parts.
ENG
17