Positioning; Adjusting The Column; Fastening The Light Head - Waldman TANEO STLZ 12 Instrucciones Para El Uso

Positioning

4. Positioning
4.1

Adjusting the column

CAUTION
Risk of injury caused by a falling or
tilting light.
Personal injury and material damage.
X Hold the light head when unscrew-
ing the pivot screws.
X After positioning the column,
tighten the pivot screws.
NOTICE
Material damage caused by wrong
handling.
Damage to the light.
X Do not move the joints opposite to
the intended direction of rotation.
Fig. 3: Joint and pivot screw.
X Place the light in the desired position.
X Tighten each pivot screw until the light
is fixed in the desired position.
4.2

Fastening the light head

Fig. 4: Fastening the light head.
X Place the light head in the desired posi-
tion.
X Tighten the friction screw A on the
light head.
ENG
A
21