How To Fit The Hammock Facing Forwards; How To Fit The Hammock Facing Backwards; Swivel Wheels; Brakes - JANE SOLO REVERSE Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

5.- HOW TO FIT THE HAMMOCK FACING FORWARDS

Fit the opening in the hammock into the A1 front fastener.
5
5.a
With the hammock supported in A1 lower the rear part until
it fits into A2.
When one side is fitted repeat the operation with the other
side.
5.b
5.c

6.- HOW TO FIT THE HAMMOCK FACING BACKWARDS

Fit the cog in the hammock into the A2 fastener.
With the hammock supported in A2 lower the rear part until
6.b
6.c
it fits into A1.
When one side is fitted repeat the operation with the other
side.

7.- SWIVEL WHEELS

Your SOLO REVERSE has front swivel wheels that can be
steered or the steering can be locked.
To lock it, push the lever downwards once the wheels are
aligned with the longitudinal axle of the pushchair.
To unlock the steering, pull the lever upwards.
8.- BRAKE
Your SOLO REVERSE has a braking system that acts simulta-
neously on both rear wheels. Use it as a parking brake whe-
never you can, it is an important safety element.
Press the brake lever to put the brake on.
Push the lever upwards to release the brake.
WARNING: When the brake is on make sure that the pushchair
has braked correctly. It may be necessary to push the pushchair
slightly for the brake to be fully activated.
6
6.a
7
7.a
8
8.a
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cross r

Tabla de contenido