Trouble-Shooting - Pressalit Care 3000 Instrucciones De Uso Y Mantenimiento

Trouble-shooting

Symptom
The shower table
does not stay in
upright position.
The product will not
work, even though
the remote control is
used correctly.
The water does not
run out of the water
collection tray.
The shower table
runs up and down
unevenly.
Contact Pressalit Care or your dealer if the problem cannot be remedied.
Do not attempt to repair the product yourself, as this will invalidate the
guarantee.
Cause
One or more gas
cylinders are
defective.
Fault in power supply.
Adjustment screws
too high or too low.
The sliding brackets
are not properly
lubricated.
1
Action
Contact Pressalit A/S or
your local dealer.
Check that all wires and
plugs are intact and
correctly connected.
Contact Pressalit A/S or
your local dealer.
Adjust the adjustment
screws .
①
Oil the sliding brackets
as described under
"Maintenance".
en
19