Whirlpool Admiral MF12120 Instructivo De Instalación, Uso Y Manejo página 3

Installation
EXHAUST DEVICE
61 cm
min.
How to Install the backguard in ranges
1.-Backguard parts are inside oven.
2.-Mount the backguard in place over the backguard support on the range, check
which backguard option is included in your range .
3.-Use the screws “A” and “B” to fix the backguard to the range.
BACKGUARD
BACKGUARD
SUPPORT
Option A
! WARNING
Do not allow children to use or play with the range;
keep children away while range is in use.
Keep the range surroundings free of flammable material,
gasoline and other vapors or flammable liquids.
Do not get too close to the flame produced by the
burners or wear loose clothing; your clothes may ignite
if contact by open flames.
Do not use your range to warm rooms, because this is
dangerous.
Failure to do so can result in death, fire or explosion.
• Proper installation is your responsibility. A
qualified technician or Service technician must
install this range.
• Remove all packing parts, card board, plastic
foam and tapes.
• Select the best location in your kitchen for your
range, protected from wind and with enough
space to open the oven door.
• Do not install cabinetry directly above the range.
• If you will install an exhaust device, put it at 61
cm minimum from the range cooktop.
• If your range has a power cord, it must be
installed near an electrical wall outlet.
• Do not use extension cords or multiple outlets.
A
A
A
B
A
B
Use a Phillips screwdriver
Fire or Explosion Hazard
BACKGUARD
A
CONICAL HEAD
B
SCREW
Option B
A
BACKGUARD
SUPPORT
B
STANDARD HEAD
SCREW
Use a Phillips screwdriver
3