Inserting Or Replacing Batteries - Perry TE526 Manual Del Usuario

3 - INSTALLATION

3.6 - INSERTING OR REPLACING BATTERIES

Slide the cover as shown in the diagrams until the battery compartment.
3.7 - LOW / FLAT BATTERY INDICATOR
When the symbol blinks , this indicates that the batteries are running out and as from this
moment there are 30 days to change them.
If the almost flat batteries are not replaced within the stipulated time, the display will go off
and the symbol will remain constantly lit.
Note: the backlight of the display is automatically deactivated.
All thermoregulation is suspended and all settings are saved to be restored when the new
batteries are inserted.
Insert or replace with 2 1.5V batteries type AA - LR6 ensuring to
place the poles correctly.
ONLY USE GOOD QUALITY ALKALINE BATTERIES
(Duracell or Energizer batteries are recommended)
Attention: battery life may be more than 2 years.
However, it is recommended to replace them at
least every 24 months to avoid them running out
when you are away (e.g. Christmas holidays, etc.)
Dispose of flat batteries in appropriate containers
and as required by the environmental protection
regulations.
T Set
EN EN
27