Lelit Kate-PL82T Manual Del Usuario página 27

The coffee grinder does not grind coffee
7
Dirty grinding blades (oils and fats deposits of
coffee residues).
The grinding blades are too close, they are
touching.
Grinding blades worn
Foreing objet that blocks grinding blades
The grinder stops due to the motor overheating
8
The grinder has worked for a long time in
continuous, causing an overheating of the
motor.
Alarms shown on the display
9
There is no water into the tank
The temperature probe is in short circuit (or
the detected temperature is above 200°C), all
the machine functions will be disabled.
The temperature probe is faulty or
disconnected all the machine functions will be
disabled.
The grinder has exceeded the maximum time
of grinding in continuous. (20 seconds)
Lelit Espresso - English
Carry out the grinding blades cleaning, see
the user manual (Cleaning of the mills) for the
opera-ting instructions.
Adjust the setting to obtain a coarser grinding.
Contact the service center
Contact the service center
Wait until the motor cools down (15-30min.)
before switching on again the grinder.
On the display the following icon appears:
Remove the water tank from its housing.
Fill the tank with water at room temperature.
Reposition the tank in the housing
On the display the following icon appears:
Contact the service center
On the display the following icon appears:
Contact the service center
On the display the following icon appears:
After a waiting time of 100 seconds, the
grinder will automatically reset.
EN
27