CHART MVE TEC 3000 Guía De Referencia Rápida página 11

Password and Security Setup
5. PRESS "SETUP"
To scroll to the desired password number.
6. PRESS "ENTER"
To select the desired password number.
7. PRESS " L " or " M"
L or
To scroll to the appropriate number. Press "Enter" to move
cursor to the next position in the password.
8. PRESS "ENTER"
After the desired password is selected. The display will now
read "Password X Level". Use the "
the security level.
9. PRESS "ENTER"
Display will read "Confirm New Password?". Use the
" L L / M" keys to select "YES" or "NO". Selecting "YES" /
will save the new password and security setting. Selecting
"NO" will abort all changes.
10. PRESS "ENTER"
To save settings.
At this time, the selected password and security level has been set and saved. Follow steps 7 - 11 to set additional
passwords and security levels, or press "Escape" repeatedly to return to the display screen. After 5 minutes of
inactivity, the controller will automatically return to the "monitor" mode. Use Table 4 to record passwords for future
reference.
TEC 3000 Quick Reference Guide
L L / M" keys to adjust /
Password 1
Use To Adjust
Press Enter For Next
L / M
L /
XXXX
Password X Level
Use To Adjust
Press Enter For Next
L / M
L /
Level X
Confirm New
Password?
NO
Use To Adjust
L / M
L /
10