About The Goflex Net Media Sharing Device - Seagate FreeAgent GoFlex Net Guia Del Usuario

About the GoFlex Net Media Sharing Device

GoFlex Drive Docks
LED
Capacity
Gauges
Figure 1: GoFlex Net - Front View
• FreeAgent GoFlex drive docks: Convenient dock for your FreeAgent GoFlex drives.
• LED: The light on the front provides information about the device's current state and
notifies you when you have a message.
– Green blinking: GoFlex Net is starting up.
– Green solid: the device is on and connected to the service.
– Amber solid: GoFlex Net started but failed to connect to the service;
no Internet connection.
– Yellow blinking: There is a message for you. Sign in to your account to read
the message.
• Capacity gauges: The lights provide a real-time display of available drive capacity.
The lights turn on, from bottom to top, when the docked GoFlex drive reaches a
percentage of capacity, as follows:
– Light 1 (bottom) is on: 0–25% full
– Lights 1 and 2 on: 26–50% full
– Lights 1, 2 and 3 on: 51–85% full
– Lights 1–4 on: 86–100% full
– The lights are off if there is no drive docked in one of the slots. See "Safely
Removing Drives From GoFlex Net" on page 11 for instructions on removing a
GoFlex drive from a slot.
6
Figure 2: GoFlex Net - Rear View
• Power: Connects GoFlex Net to a DC 12V power source.
• Reset button: Press this button if you need to restart GoFlex Net (normally not
necessary).
Insert a paper clip or other narrow device, and then press and release the button.
The light on the front blinks for about 40 seconds and then returns to solid green.
• Gigabit Ethernet port: Connects GoFlex Net to your router.
• USB port: Connect any USB 2.0 drive or other USB mass storage device.
USB Port
Ethernet Port
Reset
Power
7