Safety Instructions
Safety Instructions for Transport
2.4
Safety Instructions for Transport
The following aspects are to be taken into account when transporting the mobile bain marie:
§
When loading, only use hoists and load lifting devices approved for the weight of the appliance to be
lifted.
§
Use transport vehicles that are approved for the weight of the mobile bain marie.
§
Do not put a defective appliance into operation under any circumstances and inform the supplier im-
mediately in such a case.
2.5
Safety Instructions for Cleaning and Care
The following aspects must be taken into account when performing any cleaning and care tasks:
§
Take the mobile bain marie out of operation, switch it off, pull out the mains plug and secure it against
unauthorised reactivation before performing cleaning and care measures.
§
Cleaning instructions must be strictly observed for reasons of hygiene.
§
Heated appliances must be out of operation and sufficiently cooled down before cleaning.
§
Do not clean the appliance with steam-jet or high-pressure cleaners. The appliance must be taken out
of operation and switched off at the mains beforehand in any area where steam-jet or high-pressure
cleaners are to be used
2.6
Safety Instructions Regarding Troubleshooting
The following aspects must be taken into account when carrying out any troubleshooting work:
§
The local Accident Prevention Regulations in force must be observed.
§
Take the mobile bain marie out of operation, switch it off, pull out the mains plug and secure it against
unauthorised reactivation before performing maintenance or troubleshooting operations. The appli-
ance must be switched off at the mains and secured against reactivation when working on the electri-
cal system. This work must only be carried out by a qualified electrician.
§
Observe the valid product safety regulations for the product when handling oils, greases and other
chemical substances.
§
Carry out all the checks and inspections of the appliance on a regular basis. Remove immediately de-
ficiencies, such as loose screw connections, melted or damaged leads.
§
Only authorised specialists may repair any faults or malfunctions.
§
Defective components may be replaced with original parts only.
2.7
Notes on Specific Dangers
Electric power
§
All work on the electrical installations may only be carried out by a qualified electrician or by author-
ised specialists under the supervision and monitoring of a qualified electrician according to the appli-
cable electro-technical regulations.
§
The appliances on which inspection, maintenance and troubleshooting s are performed must be dis-
connected from the power supply and secured against reactivation when power is not required for
such work. This may only be carried out by a qualified electrician.
4330002_A2
SPA/EB-1 | SPA/EB-2 | SPA/EB-2F | SPA/EB-2LS | SPA/EB-3 | SPA/EB-3F | SPA/EB-3LS | SPA/EB-4
Chapter 2
Page 11
Mobile Bain Maries