Storage And Recycling - Hupfer Kohler BKW1/14 L-GN Manual De Instrucciones

Chapter 4
Page 18
The interior and exterior of the banquet trolley should be thoroughly cleaned with a soft cloth before putting it
into operation for the first time.
Finally, it is necessary to check whether the appliance functions properly.
The following functions are to be checked separately:
In all the appliances: the function of the total brake.
In the heated appliances: the function of the operating elements and heating.
Before the appliance is put into operation it must be clean and dry.
4.3

Storage and Recycling

Temporary storage must take place in a dry and frost-free environment. The banquet trolley must be kept
covered with a suitable covering material to be protected against dust ingress.
The appliance kept in the storage location must be checked for damages and corrosion every 6 months.
NOTE
Before the appliance is taken back into operation it must be clean and dry.
If the banquet trolley is required to be recycled, all the operating and auxiliary materials must be disposed in
an environmentally compatible manner. The recyclable materials must be properly separated and disposed
in an environmentally compatible manner according to the local Waste Disposal Regulations. In any case,
the local bodies responsible for disposal are to be involved for this purpose. Separate the reusable materials
of the appliance (casters and plastic parts) before disposing or send the appliance to a recycling centre. Dis-
pose the electronics at corresponding collection centres.
We offer our customers to dispose their waste appliances. Please contact us or one of our distribution part-
ners.
Packaging and packing material can be sent to the recycling centre by indicating the waste disposal contract
number. If you do not have the valid waste disposal contract number, you can ask for it at
Service.
Banquet trolley heated | neutral
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
Transport, Putting into Operation and Decommissioning
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
Storage and Recycling
®
HUPFER -
91101983_A3