Klarfit Ultimate Gym 5000 Manual Del Usario página 53

EN
4
Attach T shaped support bar (13) and pulley shaft (51) to Vertical support using Hex bolts M10x50 (74), washer and nut.
Attach Chest press (10) to Up- per support (4) using Hex bolts M12x145 (67), steel bushing (42), washer and nut.
Attach pulley seat (32) to pulley shaft (51) using Hex bolts M10x60 (73), washer and nut.
Attach T shaped bolt (31) to T shaped support bar (13) using Hex bolts M10x60 (76), washer and nut.
53