Folding and unfolding
Turn the lock button (7) to the FOLDING
position.
Press and hold the release button (8) and
tilt the handlebar around 90 degrees up or
down until it clicks into place in the folded or
unfolded position.
Let go of the release button and tilt the
handlebar back and forth.
The release button should be fl ush with the
exterior.
Turn the lock button to the RIDING position
to block the release button so that it cannot
be pressed unintentionally.
You can screw the handles on or off the
handlebar by turning them clockwise or
anticlockwise.
Charging the battery
Insert the connector from the charger into
the charging socket on the battery.
Insert the other connector from the charger
into a mains socket.
The diode will show a red light while the
battery is charging.
A full charge takes 2-3 hours.
When charging is complete, the LED will be
green and the charger will automatically turn
off .
GB
29