Notes On Specific Hazards - Hupfer ITW Manual De Instrucciones

Safety Instructions

Notes on Specific Hazards

§
Carry out all the checks and inspections of the appliance on a regular basis. Remedy deficiencies,
such as loose screw connections, melted or damaged leads. Overheated induction spool carriers
need to be replaced immediately.
§
Only authorised specialists may repair any faults or malfunctions.
§
Defective components should be replaced with original parts only.
2.7 Notes on Specific Hazards
Electric power
§
All work on the electrical installations should only be carried out by a qualified electrician, or by au-
thorised specialists under the supervision and monitoring of a qualified electrician according to the
applicable electro-technical regulations.
§
The appliances on which inspection, maintenance and fault repairs are performed must be discon-
nected from the power supply and secured against reactivation when power is not required for such
work. This may only be carried out by a qualified electrician.
91249668_A2
Section 2
Page 11
Induction trolley
ITW