Storage And Recycling - Hupfer ITW Manual De Instrucciones

Section 4
Page 18
4.3

Storage and Recycling

Appliances must be kept in a dry, frost-free environment when placed in temporary storage. The induction
trolleyInduction trolley must be kept covered with a suitable covering material to be protected against dust
ingress.
The appliance kept in the storage location must be checked for damage and corrosion every 6 months.
NOTE
NOTE
The appliance must be clean and dry before it is placed back into use.
If the induction trolleyInduction trolley is required to be recycled, all the operating and auxiliary materials
must be disposed in an environmentally compatible manner. Recyclable materials must be properly sepa-
rated and disposed of in an environmentally sustainable way in accordance with local Waste Disposal
Regulations. The local agencies responsible for disposal must be contacted regarding removal. Separate
the reusable materials of the appliance (casters and plastic parts) before disposing of or send the appliance
to a recycling centre. Dispose of the electronics at corresponding collection centres.
We offer our customers to dispose of their waste appliances. Please contact us or one of our distribution
partners.
Packaging and packing material can be sent to the recycling centre by indicating the waste disposal con-
tract number. If you do not have the valid waste disposal contract number, you can request it from
®
HUPFER - Service.
Induction trolley
ITW
Condensation
Ensure that there is sufficient ventilation and no major variations in tempera-
ture in the storage location, so that condensation is prevented from forming.
Temporary storage
Induction trolleys that are not operated for a longer period of time should be
temporarily stored with opened doors in order to prevent odours in the interior.
Transport, Initial Operation and Taking out of Service
Storage and Recycling
91249668_A2