Operation; Arrangement And Function Of The Control Panel - Hupfer ITW Manual De Instrucciones

Operation

Arrangement and Function of the Control Panel

5 Operation
DANGER
ATTENTION
5.1 Arrangement and Function of the Control Panel
The control panel of the induction trolley is arranged on the front on the top of the appliance cover.
Figure 4
1 Interface for the i-button
2 yellow LED (display operation)
3 green LED (display readiness for operation)
4 red LED (display fault)
5 blue LED (display cooling)
91249668_A2
Defective spool carriers
Overheated (brown-black discolouration) or cracked spool carriers must be
replaced immediately. The electrical voltage may be considerably dangerous
to limb and life of persons and lead to serious injuries.
In case of damage, immediately inform the competent bodies and do not put
the induction trolleyInduction trolley into operation.
Damage to appliances
The induction trolleyInduction trolley may only be operated when it is in per-
fect condition with regards to technical standards. The appliance must be
checked for visible external damage and defects each time before being op-
erated.
In case of damage, immediately inform the competent bodies and do not put
the induction trolleyInduction trolley into operation.
Control panel of the induction trolley
6
7
8
9
10
MINUS key
On/Off key
SET key
PLUS key
Display
Section 5
Page 19
Induction trolley
ITW