Utilisation; Cleaning And Care - Powerfix Profi 66768 Instrucciones De Uso

Utilisation

Attention!
The pump is self priming. If the pump
seconds, turn the drill
son, do not allow the pump
the discharge side is closed.
µ
Place the open end of the suction hose into the liquid that is to be pumped.
The suction hose may not be longer than 3 m. Ensure that the suction hose
does not pull in air.
If the pump
and then lift it so that the liquid runs before the pump.
µ
Allow the drill
so that you can react quickly in the event of danger. Absolutely ensure
that the electric drill
Should the rotation speed of the electric drill
use this to regulate the discharge flow.
µ
Turn the drill off immediately after the container is empty.

Cleaning and care

Clean the pump
to the plastic surfaces, do not use solvents or abrasive cleaning agents.
The pump is maintenance free.
u
off immediately to avoid seizure. For this same rea-
q
to commence suction if the pressure hose on
q
does not commence suction, fill the hose with some water
u
, now the pump
u
is rotating to the right, as with normal drilling.
q
with a dry or lightly moistened cloth only. To avoid damage
q
does not start to suck up within 12
q
, to start-up – but not without supervision,
u
- 38 -
be adjustable, you can