Accessory List - NSK TI-Max X-SG20L Manual Del Operador

3. Accessory List

No.
1 Internal Spray Nozzle
2 Nozzle Holder
3 Y-Connector
4 Cleaning Wire
5 E-Type Spray Nozzle
4. Connecting and Disconnecting the Handpiece from the Motor
4-1 Connecting
1) Insert the handpiece direct into the motor (Fig. 1). Turn the handpiece until it clicks and
locks into position.
2) Confirm that the handpiece is securely connected to the motor.
4-2 Disconnecting
6
Hold the motor and the handpiece, then pull apart.
Part Name Quantity
1 Included in the package for X-SG20L / SG20
1 Included in the package for X-SG20L / SG20
1 Included in the package for X-SG20L / SG20
1 Included in the package for X-SG20L / X-SG25L / SG20
1
Remarks
-
Handpiece Motor
Fig. 1