Chapter 1. Foreword; Preface; Packaging Machine Performance; Machine Technical Data - Minipack-Torre Ministretch Aut Instrucciones Para La Instalación, Uso Y Mantenimento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Chapter 1. Foreword

1.1. Preface

This manual has been drawn up in compliance with the UNI10893 standard dated July 2000. It is meant for all users in
order to enable them to use the machine correctly. Keep it in a place which can be easily accessed in the proximity of the
machine and which is known to all users. This manual is an integral part of the machine for safety reasons. We wish to
specify the symbols in use here below in order to improve understanding of them.
ATTENTION:
Accident prevention rules for the operator. This warning indicates the presence of dangers which
can injure the person operating on the machine.
ATTENTION:
Hot parts. Shows the danger of burning, thus involving the risk of a serious accident for the
exposed person.
WARNING:
It indicates the possibility of damaging the machine and/or its components.
All reproduction rights of this manual are reserved to the manufacturer. Partial or complete reproduction is forbidden as
provided by the law. Descriptions and pictures provided in this manual are not binding. Therefore the manufacturer,
reserves the right to make any change considered necessary. This manual cannot be transferred for viewing to third
parties without authorisation in writing from the manufacturing company. The machine must be used only for the purpose
it was built for. Any other use shall be considered "improper" and therefore dangerous. Before carrying out any operation
on the machine it is compulsory to read carefully all instructions provided in this manual, in order to avoid possible
damage to the machine, to people and property.
Do not operate if in doubt about the correct interpretation of the instructions.
Contact the manufacturer in order to obtain the necessary explanation.
Upon delivery check that the machine is complete in all parts.
Possible faults shall be immediately reported to the manufacturer.
The manufacturing company declines any liability in case of machine improper use and/or in case of damage resulting
from operations carried out on the machine that are not mentioned in this manual.

1.2. Packaging machine performance

You have bought a machine with outstanding features and performance and we thank you very much for your confidence
in choosing it. The System is unique in its kind and has achieved worldwide succes with innovative and patented
machines operating in the field of packaging and wrapping. It is handy, low-priced and protected by patents at home and
abroad. The technological concept underlining its design, as well as the components and materials used in the
manufacturing and testing process are the best assurance of proper operation and long-lasting liability.

1.3. Machine technical data

Package weight and sizes
Width = 860 mm
Length = 770 mm
Height = 730 mm
Weight = 82 Kg
Machine weight and sizes
a = mm700
b = mm730
Electrical system
Voltage (V): see data on plate
Frequency (Hz): see data on plate
Maximum absorbed power (W): see data on plate
Maximum absorbed current (A): see data on plate
N.B.: When contacting the Manufacturer, always indicate the model and the serial number
specified on the plate on the rear part of the machine.
Maximum production
The machine can carry out up to 12 packages/minute
c = mm700
Weight = Kg64
11
(figure 1.3. page 47).
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido