Possible Inappropriate Use; Complying With The Operating Manual; Safety Signs On The Machine - Gebhardt Anlagentechnik TD13 Manual De Uso

2.3

Possible inappropriate use

Any use other than that described is inappropriate and can lead to risks and damage.
When operating the turbo steamer keep in mind:
- The use of not approved products is forbidden.
- The use of not approved working and auxiliary materials is forbidden.
- Use in potentially explosive areas is forbidden.
The machine must not be modified or altered in any way without the manufacturer's approval.
-
- The stipulated operation and maintenance must only be performed by authorised and trained
personnel.
- The use of consumables and replacement parts not authorised by the manufacturer is
forbidden.
- The machine must not be operated under normal conditions without all safety devices. All the
safety features must be correctly installed and fully functional.
- The machine may not be operated in operating modes (e.g. maintenance mode), which
necessitate the removal of certain safety features. At the end of the maintenance work, all
safety features must be reinstalled as intended and must be tested for functionality.
- The machine must not be operated in the case of disturbance or damage. Identified disturbance
and damage noted must be rectified immediately.
- Bridging safety technical equipment (end switches, sensors, measurement systems etc.) is
forbidden.
- Covering or removal any of the warning signs and notices is not permitted. These must remain
clearly visible and legible at all times.
2.4

Complying with the operating manual

This operating manual must be adhered to.
This operating manual is:
- a machine component
- to be kept safe and up-to-date over the entire life-span of the machine.
- to be passed on to any subsequent machine owner.
2.5

Safety signs on the machine

The following danger and notice symbols are used in the operating manual and on the machine.
These must be adhered to:
Translation of the original operating manual Steam Generator TD
14.11.2017
CAUTION
is used in cases where non-adherence to instructions can lead to risk to the
operator!
ATTENTION
is used in cases where non-adherence to instructions can lead to damage to the
machine!
Safety
Site 32 of 96
English