Phone (800) 828-5500 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are
also available free of charge at www.troybilt.com.
Cause
1. Ground is hard.
2. Not enough weight on tray.
3. Spoon edges not sharp.
1. Ground is soft.
2. Too much weight on tray.
1. Weights are not properly secured.
1. Water ground or wait for rain.
2. Add additional weight to the tray.
3. See authorized service dealer to have spoon edges
sharpened.
1. Wait until ground begins to dry.
2. Remove excess weight from the tray.
1. Secure weights with a tie-down to the holes in the tray.