Measures At The End Of Use - Hupfer Powerstapler PSUH Manual De Instrucciones

Operation

Measures at the End of Use

Moving the appliance
§
Switch off the appliance with the on/off switch.
§
Pull out the mains plug and insert it into the plug park provided.
§
Release both total locks.
§
Take hold of the push handles on the appliance and move the appliance to its destination.
§
Once at its destination, apply both total locks, so the appliance isn't moved by accident.
§
Insert the mains plug into a suitable earthed socket.
§
Switch on the appliance using the on/off switch.
5.4 Measures at the End of Use
WARNING
§
Once at its destination, apply both total locks, so the appliance isn't moved by accident.
§
Switch off the appliance with the on/off switch.
§
Pull out the mains plug and insert it into the plug park provided.
91346811_A1
Hazard caused by hot surfaces
The internal surfaces of the appliance and the base plates may become hot
during use and will only cool down slowly in the air.
Allow the appliance to cool down sufficiently with open covers and wear suita-
ble protective gloves.
Section 5
Page 23
Powerstapler
PSUH