General Information; General Discription Of The Machine - Sima POLYPANEL 125 Manual De Instrucciones

1. GENERAL INFORMATION

WARNING: Pease read and understand perfectly the present instruction before using the machine.
The manufacturer. thanks you for your trust in our products and for purchasing the TABLE SAW.
This manual provides you with the necessary instructions to start, use, maintain and in your case, repair of
the present machine. All aspects as far as the safety and health of the users is concerned have been stated.
Respecting all instructions and recommendations assures safety and low maintenance. As such, reading this manual
carefully is compulsory for any person responsible for the use, maintenance or repair of this machine.
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance or
repair of this machine.
It is recommended to have always this manual in an easily accessible place where the machine is
being used.

2. GENERAL DISCRIPTION OF THE MACHINE

Table saw are designed and manufactured to be used at masonry building sites to cut sandwich panel... The
cutting tool is a widia disk powered by an electric motor. The progress of the disk is done manually by moving the
cutting head in the direction of the material to be cut. Table saw are manufactured of high quality materials.
Any use other than the machine has been designed for is considered inappropriate and can be
dangerous; therefore, it is expressly prohibited.
Allows the raising and lowering the cutting unit at different heights.
• The bedplate has a rubber protection on its upper surface to prevent slippage of the pieces cut.
• The engine or cutter head bearings moves by sliding across the bridge made entirely of aluminum material.
• It has four detachable legs for easy transport.
• It has a safeguard blades.
• The electrical gear complies with EU normatives.
• For transport safety, the cutting unit is provided with a safety element that prevents movement thereof
through the guideways during transport.
• Bench has removable.
• This machine model is built according to EU directives.
• All motor bearings are mounted with a degree of sealing to ensure long life to its elements.
 Includes two clamping pads to fasten the material to cut
3
ENGLISH