Manual Purpose; General Warnings - Mocom millrack Manual Del Operador

MANUAL PURPOSE

GENERAL
WARNINGS
The purpose of this manual is to provide instructions for:
– becoming generally familiar with the product;
– its correct assembly and installation;
– its safe and efficient use and maintenance;
The product must always be used according to the procedures included in this manual
and never for purposes other than the ones indicated.
THE USER IS RESPONSIBLE FOR ALL LEGAL REQUIREMENTS
RELATED TO THE INSTALLATION AND USE OF THIS PRODUCT.
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY
BREAKAGE, MALFUNCTIONS, PROPERTY DAMAGE OR INJURY IN
THE EVENT THAT THE PRODUCT IS NOT INSTALLED OR USED
CORRECTLY.
Please observe the following precautions in order to avoid injury or property damage; in
particular:
– Use ONLY recommended cleaning detergents.
– Do not pour water or other liquids or inflammable products on the equipment;
– Do not use the equipment in the presence of gas or explosive or inflammable
vapors;
BEFORE PERFORMING ANY MAINTENANCE OR CLEANING,
CHECK THAT THE EXTERNAL BREAKER IS OFF.
WHENEVER THE EXTERNAL BREAKER IS FAR AWAY OR, AT ANY
RATE, NOT VISIBLE TO THE MAINTAINER, PLACE A WORK IN
PROGRESS SIGN ON THE EXTERNAL BREAKER AFTER TURNING
IT OFF .
– Make sure the electrical system is grounded conforming to current laws and/or
standards;
– Do not remove any label or nameplate from the device; request new ones, if
necessary.
– Use only original replacement parts.
THE FAILURE TO OBSERVE THE ABOVE, RELEASES THE
MANUFACTURER FROM ALL LIABILITY.
WARNING
DANGER
WARNING
3