Opening And Closing The Housing - Ingecon SUN 1Play TL GM Manual De Instalacion Y Uso

Installing the unit
Make the connections in the following order:
1. Connection of accessories (optional).
2. AC connection.
3. DC connection.
It is mandatory to follow the order described above. Do not switch on the power until you have made
all the connections and closed the unit.

6.3. Opening and closing the housing

To access the inside of the unit open the cover of the housing by removing the four front screws.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws applying a torque of 53.1 lb.in (6 Nm).
Check that the unit is correctly closed before starting up the unit.
ABE2013IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
23