Guarantee Certificate - Arregui PLUS C Manual De Instrucciones

<EN>
PRODUCT CERTIFICATION
Arregui Buzones y Sistemas de Seguridad S.L. certifies that
safes of the PLUS C family with the following references:
180340; 180350; 180370; 180380;
180040; 180050; 180070; 180080;
181340; 181350; 181370; 181380;
181040; 181050; 181070; 181080;
have been tested at the APPlus+ LGAI Technological Center,
S.A.., and that the results of the aforementioned tests are
recorded in the reports 14/9221-1597 and 14/9221-1599
which classified the boxes as S2 Grade according to UNE EN
14450:2007. (British Standards equivalency).
Similarly, it is stated that the safes:
180310; 180320; 180340; 180350; 180370; 180380; 180390;
180040; 180050; 180070; 180080; 180040-SL; 180080-SL;
181310; 181320; 181340; 181350; 181370; 181380; 181040;
181050; 181070; 181080;
possess a locking system certified in accordance with
Regulation EN1300.

GUARANTEE CERTIFICATE

The safe is guaranteed for a period of 24 months from the date of
its purchase, as established by the Law 23/2003 dated July 10th on
Guarantees in the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared within
a period of two years in the event of any manufacturing fault which
affects the functioning of the safe from the date of its delivery, accor-
ding to the law. As from the first 12 months, the buyer must prove that
the non-conformity already existed at the moment he received the safe.
The faults produced as a result of an improper use or installation, an
excess of humidity or salinity, water or cement filtrations, force, the
handling of the devices by non-authorized persons, disasters, impacts
and falls are excluded from the guarantee.
The repair or substitution of any part due to a fault implies a 6-month
extension to the guarantee of the part repaired or substituted. ABSS
will accept the responsibility for the non-conformities that caused this
repair when the same factory faults that caused the first repair are
repeated.
Identity details
Name of the supplier ..............................................................
Date of sale ............................................................................
Name of purchaser .................................................................
Address of purchaser .............................................................
Identifying details of the safe
Model .....................................................................................
Series number ........................................................................
IMPORTANT:
• These details must be completed as clearly as possible and without
delay by the supplier, who will stamp and sign on behalf of his com-
pany in the place indicated.
• The certificate remains in the possession of the purchaser.
• The purchaser must keep the RECEIPT for the purchase of the safe,
together with the GUARANTEE CERTIFICATE to be able to accredit the
date of purchase. Both documents are necessary to use the guaran-
tee.
SUPPLIER'S STAMP