Zipy GO WAVING Manual Del Usuario página 90

MP3
GO WAVING
Connecting to the computer whit earphone jack
Earp hon e
Connect the player to your PC USB port as shown through equipped USB
cable
The player will turn on automatically and display "USB connected" on the di
splay. The player will appear as a drive letter on your computer, a Mass Stor
age Class (MSC) device, and behave as a detachable drive for file transfer in
one or both directions.
Charging the player
The player charges automatically every time you connect it to your computer.
To fully charge the player, make sure your computer is on and the device is
connected for at least 3 hours. Refer to the battery level icon on the display
to check the battery level. Recharge the player when the icon is empty.
Notes: After use, shake and blow off the surface water on the earphone and
or use absorbent cloth to dry it.
3