GreenWorks Pro SN60L00 El Manual Del Propietario página 14

ASSEMBLY INSTRUCTIONS
• Ensure that the handle (9) of the chute control rod points upward, and insert the rod into the
keyed hole (10) in the back of the housing. (Fig.4.3)
• Firmly push the rod into the keyed hole in the back of the housing until it snaps into place.
• Rotate the handle on the chute control rod to ensure that it moves in the same direction as the
chute. (Fig.4.4)
(10) Keyed hole
14
(9) Handle
Fig. 4.3
Fig. 4.4