GreenWorks Pro SN60L00 El Manual Del Propietario página 15

ASSEMBLY INSTRUCTIONS
TO INSTALL BATTERY PACK (See Figure 5)
• Open the battery compartment cover (1).
• Slide the battery (2) down to lock it into position. The battery is fully inserted into the snow
thrower when you hear an audible "click".
• Close the battery compartment cover (1).
(3) Battery release button
TO REMOVE BATTERY PACK (See Figure 5)
• Ensure that the impeller has come to a complete stop.
• Release your grip on the bail to stop the snow thrower.
• Press the battery release button (3) on the snow thrower. This will cause the battery to raise
out of the tool slightly.
• Remove battery pack from the snow thrower.
(1) Battery compartment cover
(2) Battery
15
Fig. 5