Sms Commands; Track Manager; Software Settings - Cellularline GPS SAFE Manual De Instrucciones

S A F E G P S t r A c k E r

5.8 SMS Commands

Description Command
Acquire device attributes Setting
Report location Position
Ex . 886-2-8913-1666
Command:
SOS1=+886289131666,Msg+Call
SOS2=+886289131666,Msg+Call
Set up SOS phone number(s)
etc .
or
SOS3=+886289131666,Msg
SOS4=+886289131666,Call
SOS2=
or
SOS3=
Cancel SOS phone number
or
SOS4=
etc .
Set up device name Name=My_name
*Set up SOS interval SOS=900
De-activate SOS alert Dismiss
Start
Activate continuous tracking
Stop continuous tracking Stop
*Set up position logging interval Log=900
*Set up position report interval Report=900,SMS
and positioning method Report=900,GPRS
*Set up Heartbeat interval Response=3600
Activate Geofence Zone=ON
De-activate Geofence Zone=OFF
Activate audio surveillance Listen
*Note: Intervals can be set at most 86400 seconds (1 day).
28
Remarks
The GPS SAFE will report the attributes of the device's current position to the Admin
phone .
The GPS SAFE will report its current position to the Admin phone.
SOS1: The Admin phone number .
SOS2~4: The 2nd~4th SOS phone number.
Msg+Call: An alert message will be sent out first, followed by an alert call in case of
SOS emergency.
Msg: Only an alert message will be sent out in case of SOS emergency.
Call: Only an alert call will be made in case of SOS emergency.
The SOS phone numbers previously configured will be cancelled.
The name "My_name" will appear in the alert SMS message.
An SOS alert will be sent out once every 900 seconds until the SOS alert is de-activated.
This command de-activates SOS alert tracking. When de-activated, a reply of "Dismiss"
will be submitted.
This command enables the GPS Tracker to continuously report its position details and
reply "Start:OK" once continuous tracking is activated .
This command stops the GPS SAFE from continuously reporting its position details and
reply "Stop:OK" once continuous tracking is de-activated .
This command enables the GPS Tracker to log its position once every 900 seconds .
This command enables the GPS Tracker to report its position once every 900 seconds .
SMS: Report position via SMS .
GPRS: Report position to the Tracking Server .
This command enables the GPS Tracker to connect with the Tracking Server once every
3600 seconds .
Note: Connection can be established even when the device is set on motion detection
entering the sleep mode.
This command activates Geofenace area .
This command de-activates Geofence area .
This command enables the GPS Tracker to call out to the Admin phone and then
activate audio surveillance .
This surveillance call will hang up automatically in 30 minutes.

6. TRACK MANAGER

With the advancement of global positioning system network, you can now advance your GPS tracking to the next
level .
Track Manager is a small and handy tool that can be utilized to analyze all sorts of track data .
6.1 UI Overview
Main menu bar
Main menu bar allows you to quickly access the main functions and information concerned.
Import GPS Track: Click to to launch Import Wizard to import GPS track data .
New Activity: Click to add a new activity.
Hardware Settings: Click to customize the tracking modes of your GPS SAFE .
Clear Device Data: Click to clear the GPS logs saved on your GPS SAFE.
Software Settings: Click to customize the software settings of Track Manager .
Help: Click to bring up the Help file.

6.2 Software Settings

Upon the launch of Track Manager for the first time, you'll be prompted to complete software settings.
or Click on the main menu bar to configure Track Manager .
1 . Time Zone: Select the time zone of your current location .
By default, the selection of time zone will be presented according to your system configuration.
S A F E G P S t r A c k E r
IT
EN
FR
ES
DE