Sauder 414707 Manual Del Usaurio página 20

16 16
(4 used)
1R
Carefully stand your unit upright.
With a hammer tap two SHELF SNAPS (6R) into the holes in the ADJUSTABLE SHELF (J).
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS with sleeves into the hole locations of your
choice in the BACK SUPPORT (I) and the remaining METAL PINS in the ENDS (A and B).
Set the ADJUSTABLE SHELF onto the METAL PINS so the SHELF SNAPS are resting on the METAL PINS. Push on the SHELF
until each METAL PIN "snaps" into the SHELF SNAPS.
Page 20
6R
B
2R
(2 used)
www.sauder.com/services
J
J
I
A
6R
414707