Remote Control Setting - Pioneer AVR-W6100 Manual Del Usaurio

Remote Control Setting

Remote Control Setting enables remote control of auxiliary components connected to this
product's [VIDEO1] and [VIDEO2] inputs via this product.
This means, for example, that you can operate an auxiliary component by remote control
even it is located in the trunk of your car.
Auxiliary
component
Remote control
signal transmitter
1. Display a menu screen and select [REMOTE CONTROL SETTING] menu.
(Refer to page 9.)
2. Select the desired type.
Each press of the CH button selects [TYPE1] or [TYPE2].
Notes:
• To ascertain whether the auxiliary component is [TYPE1] or [TYPE2], operate it.
• Use the remote control's 2/3 buttons to select the type.
• If the auxiliary components connected to [VIDEO1] and [VIDEO2] are [TYPE1] and [TYPE2],
you can only select one type.
• If you install the remote control signal transmitter so that it is not facing the remote control sensor,
remote control signals will not be received. When you stick on the remote control sensor of the unit
being controlled, make sure it is facing the remote control signal transmitter.
Auxiliary component's
remote control
AV Remote control cable
R E M O T E C O N T R O L S E T T I N G
CARRIER TYPE
This Product
TYPE1
S E L E C T
22