Connection Diagram (VIDEO input)
Usually [VIDEO1] is ON, so connect the cord supplied with this product to the VIDEO1
input.
VIDEO3 RCA
video input (yellow)
VIDEO2
Supplied or separately
sold CD-AR600
Remote control signal transmitter
For transmission of an auxiliary components remote con-
trol signals, perform Remote Control Setting. Also, be
sure to locate the remote control signal transmitter so
that the auxiliary component can receive signals from it.
WARNING
Make sure the RCA cable connected to VIDEO3 does not obstruct the
driver's field of vision.
VIDEO3 RCA
audio input (white, red)
VIDEO1
6m
6m
This product
(Refer to page 29.)
Commercial RCA cable
(sold separately)
Commercially
available portable
video component
with RCA output
28