Tomahawk IC3 Manual Del Usaurio página 9

INITIAL
INSTALLATION CHECKS
6. Apply Lithium grease on the metal threads of all the adjustment knobs.
7. Check four (4) Allen bolts on RS pulley for tightness. If loose, apply LocTite Threadlocker
Blue-242 and retighten.
8. Verify R and L crank arm Allen bolts for tightness. If loose, apply LocTite Threadlocker
Blue-242 and retighten.
9. Wipe down bike frame with rag moistened with solvent-free spray lubricant
10. Some parts of the indoor cycle may become loose during shipment. Check crank arms and
check all exposed screws, bolts and nuts, and make sure that they are properly tightened.
CUSTOMER SERVICE
1. Provide basic maintenance instructions for clients and direct them to detailed maintenance
instructions (page 13-18).
2. Provide sign-off sheet for clients to confirm explanation of maintenance procedures/manual
and verification of condition of bikes.
9