Maintenance; Blade Cleaning - Fanimation The Islander FP3201 Serie El Manual Del Propietario

7. Attach Blade Holders to the bottom of the Rubber
Flywheel using the 10-32 x ½˝ Flywheel Screws as shown
in Figure 19.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the fi nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to fi nish.
Periodic light dusting of the Palm Leaf, Woven Bamboo,
or Wicker blades is recommended. A feather duster will
work best.
Mounting the Fan Blades (continued)

Maintenance

Blade Cleaning

8. Make sure the screws securing the Blade Holders to
the Flywheel are tight and that the Blade Holders are
properly seated on the Flywheel. (Figure 12)
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
9
CAUTION