General Description; Technical Characteristics; Controls And Connections - ESAB WC 8 Manual De Instrucciones

2) DESCRIPTION

2.1) General description

The Cooling unit of closed circuit WC8 was projected for refrigeration of MIG/MAG and TIG torches. It can be
attached to all ESAB equipment.The WC8 consists basically of a tank, a pump and a radiator. It can be fed
using 110 or 220V. It has fast quick connection for input and output water refrigeration.
N.B.: the ESAB machines have a hole in the rear panel for this connection
together with the kit.
It has safety pressure switch which when connected to the welding power source turns the power source off
in case of lack of the torch refrigeration, avoiding its over heating.
It has display to check the tank water level.

3) TECHNICAL CHARACTERISTICS

TABLE 3.1
Voltage (VAC 50/60 Hz)
Tank capacity (liters)
Input and Output water connection
Dimensions (W x L x D)`
Weight (kg) (With water)
maximum flow (Q max) (l/min)
Maximum pressure (Bar)
Power (KW)

4) CONTROLS AND CONNECTIONS

110 or 220
Quick connection
320 x 250 x 560
7
3
8
2
1
8
26
10
4.4
0.3
6
4
5
13
WC 8