Ansel 2716 Guía De Usuario página 111

Encryption: WEP
ESSID Selection: As this device supports multiple SSIDs, it is possible to configure a
different security mode for each SSID (profile). Select an SSID from the drop down list.
Broadcast SSID: Select Enable or Disable from the drop down list. This is the SSID
broadcast feature. When this option is set to Enable, your wireless network name is
broadcast to anyone within the range of your signal. If you're not using encryption then they
could connect to your network. When this is disabled, you must enter the Wireless Network
Name (SSID) on the client manually to connect to the network.
WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature
for prioritizing voice and video applications. This option can be further configured in WMM
under the Wireless drop down menu.
Encryption: Select WEP from the drop down list.
Authentication Type: Select Open System, Shared Key, or auto. Authentication
method from the drop-down list. An open system allows any client to authenticate as long
as it conforms to any MAC address filter policies that may have been set. All authentication
packets are transmitted without encryption. Shared Key sends an unencrypted challenge
text string to any device attempting to communicate with the AP. The device requesting
authentication encrypts the challenge text and sends it back to the access point. If the
challenge text is encrypted correctly, the access point allows the requesting device to
authenticate. It is recommended to select Auto if you are not sure which authentication type
is used.
Key Length: Select a 64-bit or 128-bit WEP key length from the drop-down list.
Agricultura 111 Piso 1, Colonia Escandon, Cp 11800 Mexico DF
55 52714421, 52774459, 52719163 Fax 52718216. ventas@ansel.com.mx Hoja 111 de 135
Intelligent Networking & Internet Solutions
www.ansel.com.mx