Modes; Client Bridge; Client Router; Wds Bridge - Ansel 2716 Guía De Usuario

2. Modes

MODEL 2716 provide 2 separate radio channels for wider service area. Each of these 2 radio
channels can be configured as different function mode separately. The device allows you to
configure into different modes for different purposes in your network infrastructure. Each of these
modes will have different setting. You are allowed to configure your radio channel freely with the
following combination.
2717Concurrent
Modes
Radio2(11b/g/n) AP
AP 0(LAN/WAN)
CB 0(LAN/WAN)
CR 0(LAN)

WDS Bridge

0(LAN)

WDS Repeater

0(LAN/WAN)
UR(AP) x
IUR(STA) x
Disable 0(LAN/WAN)
2.1. AP
In AP (Access Point) mode, your device acts as a communication hub for users of a wireless device
to connect to a wired LAN/WAN.

2.2. Client Bridge

When in Client Bridge, Model 2716 will associate with nearby AP and sees the network device
combination as a standard mobile unit (MU). The access point then forms a wireless bridge
between the wired LAN and clients through Model 2716.

2.3. Client Router

As Client Router mode, this allows your device to function as Client Bridge and Router as well. The
device connection map can refer to 2.2 Client Bridge.
2.4. WDS Bridge
WDS (Wireless Distribution System) allows AP to communicate with one another wirelessly. This
capability is critical in providing a seamless experience for roaming clients and for managing
multiple wireless networks.
2.5. WDS Repeater
WDS (Wireless Distribution System) Repeater is not only an extended device, but also provides a
wireless application for other wireless clients.
Agricultura 111 Piso 1, Colonia Escandon, Cp 11800 Mexico DF
55 52714421, 52774459, 52719163 Fax 52718216. ventas@ansel.com.mx Hoja 83 de 135
Intelligent Networking & Internet Solutions
WDS
CB CR Bridge
0(LAN/WAN) 0(LAN) 0(LAN)
x x x
x x x
x x x
x x x
x x x
x x x
0(LAN/WAN) 0(LAN) 0(LAN)
Radio1(11a/b/g)
WDS Repeater UR(AP)
0(LAN/WAN) x
x x
x x
x x
x x
x x
x 0(LAN/WAN)
0(LAN/WAN) x
www.ansel.com.mx
UR(STA) Disable
x 0(LAN/WAN)
x 0(LAN/WAN)
x 0(LAN)
x 0(LAN)
x 0(LAN/WAN)
0(LAN/WAN) x
x x
x x