Hoover IRONspeed SRD4107/1 Manual Del Usuario página 12

Chapter 3.4 - Vertical Steam Ironing
Chapter 3.5 - Refilling the Water Tank During Usage
Chapter 3.6 - Professional Steam Brush (only SRD4110)
Chapter 4: Maintenance and Cleaning
Chapter 4.1 - Cleaning the Appliance
11 - GB
Ironspeeed_SR__1-15_union_pprod3.indd 11
Set the soleplate temperature (12) to the max temperature and set the Multi-Steam
Technology selector (14) to the Profound care program.
at a short distance of the fabric to avoid burning it. Press the steam trigger (13) to
steam iron moving it from top to bottom.
You can fill the water tank at any time during use.
steam escapes from the soleplate and steam ironing is no longer possible.
Remove the tank from the stand by pressing the tank knob (10). Refill the water tank
without exceeding the max mark level. Replace the water tank at its original place.
You can restart ironing immediately.
Please refer to chapter 2.2 for more detailed instructions.
The professional steam brush attached on your ironing system can be used to iron
in a vertical position to easily remove creases on delicate textiles, remove odours
such as smoke from textiles and refresh worn garments.
Before using the steam brush, ensure that the ironing system is filled with water.
Switch on the appliance and when the steam ready LED lights up, the steam brush
is ready to use. Press the steam button on the brush to start cleaning.
Warning:
All the maintenance and cleaning operations have to be done when the unplugged
appliance has cooled down for at least 2 hours, to prevent any risk of burns.
Do not use any detergent or descaling products for cleaning the soleplate. Regularly
clean it with a humid and a non-abrasive cleaner.
To clean the plastic parts of the stand, please use soft clothes.
11-12-2009 9:59:57