Operation Instructions - Smartpond 52268 Manual Del Usuario

OPERATION INSTRUCTIONS

Step 1. Adjust the flow
control to the lowest
setting. Once the pump
has been turned on
(after step 4) you may
adjust the flow control
to the preferred setting.
NOTE: If you have
Model #52268 or
#52469, skip to step
3.
Step 2. For Model
#52254 / 52467 only,
connect the light to the
pump by pushing the
plug into the socket
until it is firmly seated.
Hand tighten the nut
from the plug to the
socket.
Step 3. Connect tubing
to the outlet of the pump
with the adapter.
NOTE: Tubing not
included
Step 4. Place the
pump into the water
and connect to properly grounded electrical outlet.
5 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
3
1
2
4
GFCI
outlet