Coolant Requirements - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

3.5

Coolant requirements

The power source is supplied with a minimum quantity of coolant liquid: The customer is responsible for filling the tank
before the system is used.
Use only CEBORA coolant (Item No 1514) and read the MSDS carefully to ensure its safe use and correct conservation.
The 10 litre capacity tank inlet is located to the rear of the power source, as shown in fig. 4.1.
Fill up to max level and top up to make up the volume of fluid in the pipes after the first system start-up.
NOTE: small fluid leaks will occur during use of the system and particularly when changing the torch or consumables.
Top up weekly to max level.
NOTE: after 6 months, the coolant must be changed completely, regardless of how many hours of work the system
has completed.
103/128